Cisco WAP371 Wireless-AC/N Dual Radio Access Point

SKU
RTLIS-206
Views: 7
Special Price ₦75,000 Regular Price ₦85,000

Specifications

Description

Standards

IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)

Ports

LAN Gigabit Ethernet autosensing

Cabling type

Category 5e or better

Antennas

Internal antennas optimized for installation on a wall or ceiling

LED indicators

Power, WLAN, LAN

Operating system

Linux

Physical Interfaces

Ports

10/100/1000 Ethernet, with support for 802.3af/at PoE, power port for AC adapter (not included)

Buttons

Reset button

Lock slot

Slot for Kensington lock

LEDs

Power, Wireless, Ethernet

Physical Specifications

Physical dimensions (W x D x H)

9.05 x 9.05 x 1.69 in. (230 x 230 x 43 mm)

Weight

1.81 lb or 740 g

Network Capabilities

VLAN support

Yes

Number of VLANs

1 management VLAN plus 16 VLANs for SSIDs

802.1X supplicant

Yes

SSID-to-VLAN mapping

Yes

Auto channel selection

Yes

Spanning tree

Yes

Load balancing

Yes

IPv6

Yes

●  IPv6 host support
●  IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.

Layer 2

802.1Q-based VLANS, 16 active VLANS plus 1 management VLAN

Security

WPA/WPA2

Yes, including Enterprise authentication

Access control

Yes, management access control list (ACL) plus MAC ACL

Secure management

HTTPS

SSID broadcast

Yes

Rogue access point detection

Yes

Mounting and Physical Security

Multiple mounting options

Mounting bracket included for easy ceiling or wall mounting

Physical security lock

Kensington lock slot

Quality of Service

QoS

Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), Client QoS

Performance

Wireless throughput

Up to 950-Mbps data rate (real-world throughput will vary)

Recommended user support

Up to 64 connective users, 30 active users per radio

Multiple-Access Point Management

Single Point Setup

Yes

Number of access points per cluster

8

Active clients per cluster

240

Configuration

Web user interface

Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)

Management

Management protocols

Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour

Remote management

Yes

Event logging

Local, remote syslog, email alerts

Network diagnostics

Logging and packet capture

Web firmware upgrade

Firmware upgradable through web browser, imported/exported configuration file

Dynamic Host Configuration Protocol (DHCP)

DHCP client

IPv6 host

Yes

HTTP redirect

Yes

Wireless

Frequency

Dual concurrent radios (2.4 and 5 GHz)

Radio and modulation type

Dual radio, orthogonal frequency division multiplexing (OFDM)

WLAN

802.11n/ac

3x3 multiple-input multiple-output (MIMO) with 3 spatial streams at 5 GHz

2x2 MIMO with 2 spatial streams at 2.4 GHz

20-, 40-, and 80-MHz channels for 802.11ac

20- and 40-MHz for 802.11n

PHY data rate up to 1.6 Gbps

802.11 dynamic frequency selection (DFS)

Data rates supported

802.11a/b/g:

●  54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
●  802.11n: 6.5 to 450 Mbps
◦   20-MHz bandwidth: MCS 0-15 for supported data rates
◦   40-MHz bandwidth: MCS 0-15 for supported data rates
●  802.11ac: 6.5 to 1300 Mbps
◦   20-MHz bandwidth: MCS 0-9 for supported data rates
◦   40-MHz bandwidth: MCS 0-9 for supported data rates
◦   80-MHz bandwidth: MCS 0-9 for supported data rates

Frequency band and operating channels

802.11b

2412

2437

2462

802.11g

2412

2437

2462

802.11n 20 MHz (2.4-GHz Band)

2412

2437

2462

802.11n 40 MHz (2.4-GHz Band)

2422

2437

2452

802.11a

5180

5320

5500

5700

802.11n 20 MHz (5-GHz Band)

5180

5320

5500

5700

5825

802.11n 40 MHz (5-GHz Band)

5190

5510

5795

Nonoverlapping channels

2.4 GHz

●  802.11b/g
◦   20 MHz: 3
●  802.11n
◦   20 MHz: 3

5 GHz

●  802.11a
◦   20 MHz: 21
●  802.11n
◦   20 MHz: 21
◦   40 MHz: 9
●  802.11ac
◦   20 MHz: 21
◦   40 MHz: 9
◦   80 MHz: 5

Transmitted output power

2.4 GHz

●  802.11b: 17.0 +/- 1.5 dBm @ CH6, all rates
●  802.11g: 17.0 +/- 1.5 dBm @ CH6, 6 Mbps
●  802.11g: 15.0 +/- 1.5 dBm @ CH6, 54 Mbps
●  802.11n(HT20): 17.0 +/- 1.5 dBm @ CH6, MCS0
●  802.11n(HT20): 14.0 +/- 1.5 dBm @ CH6, MCS15
●  802.11n(HT40): 12.0 +/- 1.5 dBm @ CH6, all rates

5 GHz UNII-1 (5150 to 5250 MHz)

●  802.11a: 10 +/- 1.5 dBm @ all rates
●  802.11ac(HT20): 10 +/- 1.5 dBm @ all rates
●  802.11ac(HT40): 11 +/- 1.5 dBm @ all rates
●  802.11ac(HT80): 11 +/- 1.5 dBm @ all rates

5 GHz UNII-2 (5250 to 5350 MHz)/UNII-2 Extended (5470 to 5725 MHz)

●  802.11a: 16.0 +/- 1.5 dBm @ 6 Mbps
●  802.11a: 15.0 +/- 1.5 dBm @ 54 Mbps
●  802.11ac(HT20): 16.0 +/- 1.5 dBm @ MCS0
●  802.11ac(HT20): 13.0 +/- 1.5 dBm @ MCS9
●  802.11ac(HT40): 18.0 +/- 1.5 dBm @ MCS0
●  802.11ac(HT40): 13.0 +/- 1.5 dBm @ MCS9

802.11ac(HT80): 13.0 +/- 1.5 dBm @ all rates

5 GHz UNII-3 (5725 to 5850 MHz)

●  802.11a: 18.0 +/- 1.5 dBm @ 6 Mbps
●  802.11a: 15.0 +/- 1.5 dBm @ 54 Mbps
●  802.11ac(HT20): 18.0 +/- 1.5 dBm @ MCS0
●  802.11ac(HT20): 13.0 +/- 1.5 dBm @ MCS9
●  802.11ac(HT40): 18.0 +/- 1.5 dBm @ MCS0
●  802.11ac(HT40): 13.0 +/- 1.5 dBm @ MCS9
●  802.11ac(HT80): 18.0 +/- 1.5 dBm @ MCS0
●  802.11ac(HT80): 13.0 +/- 1.5 dBm @ MCS9

Wireless isolation

Wireless isolation between clients

External antennas

None

Internal antennas

Internal fixed PIFA antenna

Antenna gain in dBi

2 dBi each antenna

Receiver sensitivity

2.4 GHz

●  802.11b: -86 dBm @ 11 Mbps
●  802.11g: -75 dBm @ 54 Mbps
●  802.11n(HT20): -69 dBm @ MCS15
●  802.11n(HT40): -66 dBm @ MCS15

5 GHz

●  802.11a: -79 dBm @ 54 Mbps
●  802.11ac(HT20): -62 dBm @ MCS9
●  802.11ac(HT40): -59 dBm @ MCS9
●  802.11ac(HT80): -57 dBm @ MCS9

Wireless distribution system (WDS)

Yes

Fast roaming

Yes

Multiple SSIDs

16

Wireless VLAN map

Yes

WLAN security

Yes

Wi-Fi Multimedia (WMM)

Yes, with unscheduled automatic power save

Operating Modes

Access point

Access Point mode, WDS Bridging, Workgroup Bridge mode

Environmental

Power options

IEEE 802.3at Ethernet switch

Cisco power injector: SB-PWR-INJ2-xx

AC adapter: SB-PWR-12V2A-xx

Peak power: 17W

Compliance

Safety:

●  UL 60950-1
●  CAN/CSA-C22.2 No. 60950-1
●  IEC 60950-1
●  EN 60950-1

Radio approvals:

●  FCC Part 15.247, 15.407
●  RSS-210 (Canada)
●  EN 300.328, EN 301.893 (Europe)
●  AS/NZS 4268.2003 (Australia and New Zealand)

EMI and susceptibility (Class B):

●  FCC Part 15.107 and 15.109
●  ICES-003 (Canada)
●  EN 301.489-1 and -17 (Europe)

Operating temperature

0° to 40°C (32° to 104°F)

Storage temperature

–20° to 70°C (–4° to 158°F)

Operating humidity

10% to 85% noncondensing

Storage humidity

5% to 90% noncondensing

System memory

256 MB RAM

128 MB flash

Package Contents

●  Cisco WAP371 Wireless-AC/N Dual Radio Access Point
●  Ceiling/wall mounting kit
●  User guide on CD-ROM
●  Quick-start guide
●  Ethernet network cable

Minimum Requirements

●  Switch/router with PoE support, PoE injector, or AC power adapter
●  Web-based configuration: Java-enabled web browser
Write Your Own Review
You're reviewing:Cisco WAP371 Wireless-AC/N Dual Radio Access Point
Your Rating
Brand Description
History Color sit amet, consectetur adipiscing elit. In gravida pellentesque ligula, vel eleifend turpis blandit vel. Nam quis lorem ut mi mattis ullamcorper ac quis dui. Vestibulum et scelerisque ante, eu sodales mi. Nunc tincidunt tempus varius. Integer ante dolor, suscipit non faucibus a, scelerisque vitae sapien.
WA button WA button